HOT WATER SYSTEM UNEXPECTED SHUTDOWN: TAKING THE RIGHT MEASURES

Hot Water System Unexpected Shutdown: Taking the Right Measures

Hot Water System Unexpected Shutdown: Taking the Right Measures

Blog Article

Check This Out

Are you looking for selective information around How to Troubleshoot and Repair an Electric Water Heater?


What Would Cause My Electric Water Heater to Stop Working?
Lots of modern-day residences make use of an electric hot water heater for their furnace, as a result of its comfort and also simplicity of use. However, much like any other electric home appliances, problems might emerge with its use, suddenly. It can be really aggravating to wake up to a cool shower rather than a warm one or having your bathroom with water that isn't warm adequate or perhaps also warm. Whatever the instance might be, hot water heater issues can be quite stressful. Fortunately, we have actually made a checklist of feasible remedies to your water heater issues. There are a number of variables that might create most of these issues, it could be an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you turn off the primary power supply for safety. Whatever the issue is, getting it repaired should not posture excessive of an issue if you adhere to these steps:

Examine Your Power Supply:


As standard as this may appear, it is very essential. Without appropriate power, your water heater will certainly not work. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power problem. Examine if the fuse is blown out or the breaker tripped. If the circuit breaker is the concern, simply transform it off and on once again. Change any busted or worn-out fuse. Evaluate the device with power after these modifications to see if it's now working.

Check the Burner in the Hot Water Heater:


If it's not a power problem, after that attempt looking into your heating element if it is still working. Examine each of your heating elements to make sure the trouble isn't with any one of them. If any one of them is damaged, replace that component and then inspect whether the warm water is back on.

Examine Your Thermostat:


If your water heater still isn't functioning or the water coming out isn't hot sufficient, you may need to examine the temperature setups on your top thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open the gain access to panel and also press the red button for temperature level reset over the thermostat. This should aid heat the water. Turn the breaker back on and inspect if the trouble has been fixed.

Call A Specialist:


If after replacing all malfunctioning parts as well as resetting your temperature level, the hot water heater still isn't working, you may require to speak to an expert plumber for an expert viewpoint. The problem with your heating unit could be that the cold and hot faucets have actually been switched or it may be undersized for the amount of warm water required in your house. Whatever the case may be, an expert plumber would certainly aid solve the problem.

Final thought


Hot water heater troubles are not constantly significant. A number of them result from small concerns like a blown fuse or damaged heating element. Replacing the faulty parts ought to work. Nevertheless, if you are still incapable to address the trouble, give a call to your nearest plumber to come to get it repaired.

8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


Hot Water Heater Repair

Do you enjoy reading up on Hot Water Heater Repair? Try to leave a comment further down. We'd be delighted to see your reactions about this entry. In hopes to see you back again before long. Appreciated our article? Please share it. Let others locate it. Thanks a lot for your time spent reading it.


Expertise at your service.

Report this page